Paver Patios in Kenner

Kenner sits low and flat between Lake Pontchartrain and the Mississippi River, and that shapes every patio we build here. The land barely slopes, the water table runs high, and heavy rain shows up fast, so a paver patio that looks great on install day can turn into a puddle if the base isn’t done right. We build for Kenner conditions first and good looks second, though you get both.

Why Kenner Yards Need a Drainage-First Patio

In subdivisions like Chateau Estates and the neighborhoods near Rivertown, the ground is alluvial delta soil, not the heavy clay people sometimes assume. It holds moisture and shifts when it stays wet, which means a patio set on a thin or poorly compacted base will rock and settle within a couple of seasons. We dig deeper, lay a proper crushed-stone base, and pitch the surface so runoff moves toward a swale, drain, or the yard’s low edge instead of toward your slab door.

How We Build It

• Excavate and compact a graded sub-base sized for Kenner’s soft, damp soil
• Set 4 to 6 inches of compacted crushed stone, then a leveling layer of bedding sand
• Pitch the field a minimum slope away from the house so water never sits
• Lock the perimeter with a rigid edge restraint so pavers don’t creep outward
• Sweep polymeric sand into the joints to fight weeds and washout during downpours

Patio Styles That Suit Kenner Homes

Kenner’s mix of mid-century ranch homes and newer subdivision builds gives us a lot of range. A clean running-bond layout in a warm gray tone reads modern next to a stucco or brick exterior. A tumbled, old-brick paver fits the historic feel near the Rivertown district. For larger lots, we use a multi-piece pattern that breaks up a big space and hides the occasional cut. Banding and a contrasting border tie the patio to your home’s color line without much extra cost.

Because Kenner summers run hot and humid with the lake and river both pushing moisture into the air, we steer clients toward lighter paver colors for seating areas. They stay cooler underfoot, and they hide the fine algae film that humidity encourages on shaded surfaces.

Permits and the Jefferson Parish Process

Most patio work in Kenner runs through the Jefferson Parish Department of Inspection and Code Enforcement. Setback rules, drainage impact, and how close you build to a property line all come into play, especially on the tighter lots near the lakefront. We handle the permit legwork, confirm your project meets parish requirements, and schedule any required inspection so you’re not chasing paperwork.

What You Get From Us

• A site walk that checks your lot’s natural drainage and low points
• A layout drawn to your home, not a copy-paste template
• Honest paver and base recommendations for Kenner’s climate
• Clean joints, locked edges, and a surface graded to shed water

Built to Last in South Louisiana

A paver patio flexes with the ground instead of cracking like a poured slab, which matters on Kenner’s shifting soil. When a section ever settles, we lift and reset those pavers instead of demolishing the whole thing. That repairability is one of the main reasons pavers outlast concrete here, and it’s why we recommend them for almost every backyard in the area. If you’re ready to turn an unused patch of yard into a space you actually use, we’ll start with a look at how your lot drains and build from there.